Epinox PLS.OV-12 Flügel Solingen Table, Red

Diamond particles with special shapes ensure quick sharpening of the blade.

2 million diamond particles are applied to the surface through special processes.

Made of steel. It has sharp edge features.

The handle part has an ergonomic design and a finger guard for your safety.

It is made of steel chrome vanadium.

The sharpening part is 30 cm 12" in total length.

How to Use;

- The cutting edge of the blade should be drawn with the sharpening stone held at 15°-20°, from the base to the tip, without applying pressure.

Note;

- If the thickness of the sharpening edge, i.e., the mouth of the blade, has become too thick, it should be thinned to between 0.4 and 0.6 mm.

- If the blade gets too hot during sharpening, it alters the structure of the steel, reducing corrosion resistance and the hardness of the blade. Therefore, it can lead to a loss of the blade's edge-holding ability.

- The sharpening process should be applied flawlessly from the base to the tip in a way that creates a thin wire edge on the cutting edge.

- The thin wire edge formed on the cutting edge during sharpening should not be removed to finish the sharpening process.

- If the burr on the edge is not carefully removed, it can significantly deteriorate the cutting sharpness and resistance to dulling of the blade.

- The blade surface should have a straight cutting line and a notched or jagged edge can lead to the blade breaking.

- Blades should not be exposed to substances that can cause high corrosion, such as salty water, for extended periods.