Make sure the power cable is unplugged when attaching or removing the motor from the machine.
Do not unplug the cable from the socket with wet or damp hands.
Do not leave the machine unattended, especially while it is plugged in.
Do not use your machine in areas where it may come into contact with heat sources (e.g., stove) or wet areas (e.g., sink).
Use the device only as described in this manual and continuously for a maximum of 15 minutes.
Only use the cable provided with the product and extensions that comply with the values specified on the motor label.
When operating the machine with the motor attached, avoid wearing ties, scarves, or long jewelry; also, make sure to tie your hair back to prevent it from falling forward.
Repairs related to electrical wiring must be performed by authorized personnel. Unauthorized persons should not access the internal parts of the motor.
The amount of material used (solids and liquids) should not exceed the mark inside the bowl.
After using all three functions of the machine (kneading, sheeting, extrusion), turn off the machine and leave the lid open for 10 minutes before resuming operation.
CAUTION!
This product is not intended for use by persons with reduced physical, sensory, or mental capabilities (including children) or inexperienced and uninformed individuals. These persons may only use the appliance under close supervision. If a child is to use the appliance or if it is being used near a child, extra caution must be exercised. Ensure that the child is not playing with the appliance while in use. This appliance is not designed for children's use. Store the appliance and its cable out of the reach of children.
IMPORTANT SAFETY WARNINGS
When using electrical appliances, always follow these basic safety precautions:
Read all instructions.
To reduce the risk of electric shock, do not immerse the machine or motor in water or any other liquid.
Extra caution should be taken if the appliance is used by or near a child.
Before attaching or removing parts and before cleaning, first turn off the appliance and unplug it. To unplug, grasp the plug and pull it towards you. Never attempt to unplug by pulling the cord.
Avoid contact with moving parts.
Never feed food into the machine with your hand. Use an appropriate tool instead.
Do not operate appliances with a damaged cord or plug, or if they have been dropped or damaged in any way. Take the appliance to the nearest authorized service center for inspection, repair, or electrical/mechanical adjustments.
To prevent fire, electric shock, or injury, do not use accessories that are not recommended or sold by the manufacturer.
Do not use outdoors.
Do not let the cord hang over the edge of the counter or table.
CONTROL PANEL
Power on/off button.
Red LED light (left) (blade chamber): If the light is on, the lid is not fully closed.
Blue LED light: If the light is on, the machine is ready for use.
Red LED light (right) (lid): If the light is on, the lid is not fully closed.
Control button: Press this button to operate the blade.
PREPARING THE MACHINE FOR USE
Before the first use, wipe the entire machine with a damp cloth.
To clean the rollers, pass a small piece of pasta dough through them and discard it afterward.
Caution! Check the voltage. Make sure that the voltage you are using matches the values listed on the machine's specifications label.
